Akpụkpọ Enyere Gas aka

Nkọwa dị mkpirikpi:


Nkọwa ngwaahịa

Mkpado ngwaahịa

Automotive center nchekwa igbe ebu imewe show

ngwaahịa-nkọwa1
ngwaahịa-nkọwa2

Sunwin ebu nwere ihe karịrị afọ 20 nke ahụmịhe bara ụba na nrụpụta gas na-enyere aka, nke nwere ike imeju imepụta na ịgbanye ngwaahịa gas na-enyere aka n'ahịa, na-ejere onye ahịa ya ozi na ọkọlọtọ dị elu, ịdị elu, oge nnyefe ngwa ngwa, yana ọnụ ahịa asọmpi.

ngwaahịa-nkọwa3

Tebụl okirikiri ịgba ọgwụ na-enyere gas aka

ngwaahịa-nkọwa4

Usoro enyemaka gas bụ usoro mgbagwoju anya.N'ozuzu, a na-ebu ụzọ jupụta ngwaahịa ahụ, mgbe ahụ, a na-afụ ikuku ikuku dị elu, a na-afụpụta ihe ndị dị na steeti ọkara gbazere, na gas na-eji kama igwe na-akpụzi injection iji nweta ngwaahịa ahụ.Bụrụ onye na-akpụzi enyemaka gas.

A pụkwara idozi ịkpụzi gas na-enye aka site na ụzọ ndị na-adịghị mma, dị ka ịgbanye nitrogen n'ime ihe ọkụkụ na 70%-80% ozugbo, na iji nitrogen-enyere aka ịkpụzi maka ọnọdụ jupụtara.Usoro a bụkwa usoro a na-ahụkarị na enwere ike iji ya ma ọ bụrụ na ọ dị mkpa.

Ọnụ ọgụgụ nke modul na gas na-enyere aka na-akakarị 1 * 1.Ọnụ ọgụgụ nke oghere ebu ga-eme ka rọba ma ọ bụ ikuku oriri ghara ịdị n'otu.Usoro a siri ike ịhazigharị.Mgbe a na-emepụta ya nke ọma, ọ ga-emepụta ọnụ ọgụgụ dị elu.Ya mere, a na-akwadokarị ya.Ọdịdị oghere modul.Ọ bụrụ na ị na-emepụta ihe nhazi 1+1, ị ga-achọ oghere ikuku abụọ dị iche iche maka valvụ agịga abụọ.A chọrọ ndị na-ahụ maka enyemaka gas abụọ, nke ga-eme ka ngwaahịa ahụ guzosie ike.

gas enyemaka plastic injection ebu ihe ngosi ngosi

nkọwa ngwaahịa05
nkọwa ngwaahịa04
nkọwa ngwaahịa03
ngwaahịa-nkọwa8
ngwaahịa-nkọwa9
nkọwa ngwaahịa02
nkọwa ngwaahịa01

Usoro ịgbanye mmanụ ọkụ na-enyere gas aka

A na-ekewa ịkpụzi injection nke gas na-enyere aka na nkebi 4: injection plastic, injection gas, nrụgide nrụgide, na nkwụsị gas.

Nke mbụ, a na-agbanye plastik gbazere n'ime oghere ebu ruo mgbe agbaze na-ejupụta site na 70% ruo 90% nke oghere ebu.Okpomọkụ nke gbazee dị ala, na oghere oghere na-etolite a thinner agwọ ọrịa oyi akwa.E jiri ya tụnyere usoro ịkpụzi a na-ahụkarị, nrụgide ịkpụzi a chọrọ dị ala n'ihi na oghere ahụ na-ejupụta nanị akụkụ ụfọdụ, na ọwa ikuku na ebu na-emekwa ka mgbaze nke gbazee.Ọ bụrụ na nrụgide ịkpụzi ahụ dị elu ma na-eji ihe dị ukwuu eme ihe, ọ dị mfe ime ka mgbaze gbazee na sink akara n'ebe ndị nwere nnukwu ihe;ọ bụrụ na ihe ahụ dị ntakịrị, ọ ga-eme ka ịfụ.

2. Ngwunye gas: A na-agbanye gas nwere ụfọdụ olu ma ọ bụ nrụgide (n'ozuzu nitrogen gas) n'ime ụlọ.N'ime oge a, oge ngbanwe iji gbanwee site na gbazee gaa na injection nitrogen, ma chọpụta n'ụzọ ziri ezi nrụgide gas, metụtara àgwà ngwaahịa, ọkwa a nwere ike ịpụta ọtụtụ ntụpọ gas injection ngwaahịa, obere nkwụsị nkwụsịtụ bụ ịchịkwa ọkpụrụkpụ nke condensate. oyi akwa, dozie oghere ikuku gas, na-eme ka ọnụ ụzọ ámá plastik dị jụụ iji gbochie ikuku gas (gas na-asọ site na ọnụ ụzọ ámá karịa ọwa ikuku preset.

3. Nrụgide nrụgide: Mgbe oghere na gas ga-ejupụta na ụfọdụ nrụgide gas, site n'ime n'èzí, iji hụ na elu elu nke ngwaahịa dị nso na mgbidi ebu;na site na ntinye nke abụọ nke gas (gas na-aga n'ihu n'ime ime plastik), iji mejupụta nkwekọrịta jụrụ oyi nke ngwaahịa ahụ, nchebe nrụgide n'ozuzu na-agụnye njide dị elu na nrụgide dị ala na-ejide ọkwa abụọ.

4. Mwepu ikuku: Mgbe ngwaahịa ahụ kwụsịrị ma guzosie ike, gas dị n'ime oghere na isi nwere ike ịpụpụ site na agịga iyuzucha ma ọ bụ ịgbasa, wee mepee ebu iji wepụ ngwaahịa ahụ.Ekwesiri ighota na a ghaghi ikpochapu gas injection n'ime usoro ntinye aka nke gas na-enye aka tupu emeghe ihe.Ọ bụrụ na a naghị ewepụ gas nrụgide n'oge, ngwaahịa ahụ ga-agbasa ma ọ bụ ọbụna gbajie.

Ihe ngosi ihe ngosi ihe ntụtụ rọba na-enyere mmiri aka

nkọwa ngwaahịa06
nkọwa ngwaahịa07

1. Mmiri aka injection ịkpụzi iji mmiri, mmiri injection ịkpụzi nwere ike recycled na reused, otú ahụ ọkara mmiri nke abụọ akpụ usoro mmiri dị ọnụ ala karịa nitrogen;

2. Ọnụ ego nke ihe eji emepụta ihe na-emepụta ihe na-enye aka mmiri dị ihe fọrọ nke nta ka ọ bụrụ ugboro 10 karịa nke gas na-enyere aka ịkpụzi injection.Ka ọ dị ugbu a, a pụrụ ibubata ịkpụzi ihe inyeaka mmiri;

3. A na-eji mmiri na-eme ihe na-eme ka mmiri na-eme ka ọ bụrụ nke ọma, ọ bụghị maka ịkpụzi injections dị mkpirikpi;

4. A na-eji ngwa ngwa nke ihe plastik na-eme ihe na-eme ka gas na-eme ka ọkpụkpụ na-eme ka ọ bụrụ nke a na-eji eme ihe karịa nke a na-eji mmiri eme ihe;


  • Nke gara aga:
  • Osote:

  • Dee ozi gị ebe a ziga anyị ya